Shipwreck! S.S. 'Lucky'
Sean Hadfield [Windysean] has shared his kitbashing and scratchbuilding skills with us before and now we see his latest creation - a shipwreck next to a railroad bridge.
HO Scenery: ShipwreckSean shares this media magnet model that was featured in television coverage of the Mad City Model Train Show. Sean narrates his process thusly;
To cut the hull on an odd slant, I sighted across a straightedge and marked dots on the hull along my sight-line. Then I wrestled with a hacksaw while maintaining the line of the markings.
Ideally, I would have mounted it to a scrap wood block at the desired angle and then run it through a band saw.
Posts and Lots of Pieces
Just tune out the world and keep measuring, cutting, and adding little styrene items. The 1/87 scale sailor helps me determine sizes. The 1/108 scale kit lends partsó search light, navigation markers, and bits. The wheelhouse roof is not glued, so I can paint black inside and add windows after painting.
Light gray, faded, patchy prime coat, dusted white overall. The very heavy paint is cracking and pulling better than I hoped.
The name decals from the kit, ironically named "Lucky", were white, so I needed to paint a dark background for them.
For the broken glass, I cut random triangles and sharp shapes from clear styrene. Then, I laid a bead of tacky craft glue around the inside of the window openings and randomly placed pieces in it.
The awning was a lesson in itself. I fit and cut a pattern from scrap paper, then traced onto facial tissue. I brushed on diluted white glue, but to my surprise, it expanded in size, so I fit it back in place on the frame to dry. When it was dried, I removed it and cut it to size again with scissors.
Then, off the boat, I brushed on a thin coat of white craft paint. Using the stencil in the photo, made from a business card, I dry-brushed on the blue stripes. The final awning was glued down with Aleene's Tacky Craft Glue. For the tears, I re-wet the white glue and used a hobby knife to slash it, then poked the sagging parts with a toothpick until it hung down correctly.
The paint looked too dark, so I dry-brushed more white above and red below, and it brightened up nicely. The moldy green was heart-stopping for me, because it was so bold. Until then, I had been using only subdued colors.
It looked unbalanced without the bow mast (bowspirit?), so I extended a piece of clear plastic to the center front, and mounted another mast, painted, and strung.
Copyright ©2019 by Sean Hadfield. Images also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of AeroScale, KitMaker Network, or Silver Star Enterrpises. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved. Originally published on: 2018-02-24 20:27:09. Unique Reads: 4857