login   |    register
Eduard [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

Built Review
172
Lightning F.1A/F.2 exterior
BAC Lightning F.1A/F.2 exterior and BAC Lightning ladder P.E-sets
  • move

by: Andy Brazier [ BETHEYN ]

Introduction

Both these etched sets are for the Trumpeter Lightnings but can be placed on the MonoChrome Lightnings as they are pretty much the same kit.

BAC Lightning F.1A/F.2 exterior etched set

One sheet of steel Photo etch is all that you get for your $ 22.95, along with a small instruction sheet.
The etch holds replacement and additional parts for the undercarriage legs, wheel bays, afterburner and the speed brakes.
Starting with the wheel bays, the etch covers the inside of the main and nose gear floors and has some raised rivet detail on them. There are also a couple of parts in the main gear well that get replaced. Gear door hinges are replaced and the main nose door has a new interior plate added.
The undercarriage legs get the attention of some new oleo's for the main legs as well as brake lines for the legs. The brake lines are a bit 2 D ish but do liven the legs up once painted. Both the main wheels have new covers for the hubs on both sides, which does improve the look of the plastic parts.
The speed brakes have new internal faces for both the doors and insides of the brakes as well as some new actuators added.
The exhaust has new afterburner rings added halfway down the pipes. This part is in my opinion completely unnecessary as once the pipes are fitted onto the aircraft with the rear exhaust in place you can't see the rings, at all.
Now usually an etch set improves a kit but with this set you don't notice a lot of difference, as most of the parts that are replaced are so small its actually hard to tell the difference between the etch part and the part you just replaced. 90% of the parts are fiddly to say the least and require a magnifying glass to see let alone bend. Most of this set doesn't add to the finished aircraft except for the undercarriage which does look better, just lol.

BAC Lightning ladder

Priced at $16.95 the one small steel fret holds the ladder which is broken into 3 pieces. A small instruction sheet has an exploded view of the parts to be bent and where they are placed in relation to one another, along with a drawing on where the ladder is placed on the aircraft.
Now actually building this very delicate thing is hard, as I found out in the first 2 seconds, when I bent the first part I took off the fret. The 3 separate parts all need to be bent in the appropriate places then lined up and glued together, but no matter how I tried i couldn't get them to line up properly with out bending them out of shape. It did go together in the end but it is a bit misshapen. The finished ladder does look a little 2 dimensional, but with a few coats of paint it should look pretty good sitting next to the aircraft.
I think someone with a lot more patience then myself could have done a far better job of it then my hamfisted effort. I can always use it as a template for one made out of plastic lol.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE
SUMMARY
Highs: Undercarriage benefits a little from the set. Ladder does look good once by the aircraft.
Lows: Can't really see the point of most of the exterior set. Ladder is fiddly and delicate to build.
Verdict: Not particularly impressed with this exterior set from Eduard, they have done better in this scale before. Can't help but feel its an etch set for etch set sake. Ladders nice though.
Percentage Rating
60%
  Scale: 1:72
  Mfg. ID: 72497 + 72496
  Suggested Retail: see text
  PUBLISHED: Aug 07, 2009
  NATIONALITY: United Kingdom
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 84.81%
  MAKER/PUBLISHER: 88.39%

Our Thanks to Eduard!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Andy Brazier (betheyn)
FROM: ENGLAND - SOUTH EAST, UNITED KINGDOM

I started modelling in the 70's with my Dad building Airfix aircraft kits. The memory of my Dad and I building and painting a Avro Lancaster on the kitchen table will always be with me. I then found a friend who enjoyed building models, and between us I think we built the entire range of 1/72 Airfi...

Copyright 2018 text by Andy Brazier [ BETHEYN ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move