login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Eduard  Model Accessories [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
148
Matra R-530
Matra R-530 air-to-air missile
  • move

by: Andy Brazier [ BETHEYN ]

History
The Matra R.530 is a French medium to short range air-to-air missile. It was available in infrared homing and semi active radar homing as the main armament of the Mirage III which was able to carry a single missile in the centerline, the Mirage F1, which carried two (one of each type) under the wings, and the F-8 Crusader in the French Navy service.
Info from Wikipedia

In the pack
Packed in a blister pack the resin parts are snug and safe with a foam backing.
The contents of this missile set are -
21 resin parts
2 clear resin parts
1 small photo etch set
A set of stencil decals
A set of instructions

All the parts are flawlessly cast with no imperfections in the resin.
The parts are connected to the casting blocks on one side and are easy to remove and clean up.
Detail is beautiful with the missile have some recessed and raised areas, and the pylons having some very delicate recessed lines and rivet detail.

Each missile is made up of the main body, four fins, a rocket exhaust, and photo etch plate which fits behind the exhaust, and either a two part seeker head using the clear resin part or a one piece head for the seeker.
The rest of the parts, make up the three pylons, of which there are two types.
There is one Mirage III pylon and two pylons for the Mirage F-.1.
Each pylon has a part to be attached to the rear of the pylons. Two spare parts are supplied, should the Carpet Monster require feeding.

Instructions and building
The instructions are printed on two postcard sized sheets, and are in the standard black line drawing style.
The build takes place over three steps, with each step having sub-steps.
Colours for the missile and pylons are given alongside the build for the usual Gunze and Mr Color paints.
A stencil guide is on the back page of the second sheet.

Step 1 The first process is too attach the fins to the missile body, keeping in mind there is different numbered fins, which fit on the correct way.
One of the fin parts, labelled R4 should be swapped for R3 as R4 lacks the indent on the rear of the fin. Bit of slack checking of the instructions there Eduard.
This stage also has the P.E part and rocket exhaust fitted.
Eduard show where a 0.4mm wire should be attached to the rear of the missile (wire not supplied).
Sub steps, A and B have the two different seeker heads fitted.

Step 2 and 3 With the missile built, its now time for fitting the pylon. Step 2 is for the Mirage III pylon and step 3 is for fitting the Mirage F.1 pylons.
As already mentioned each pylon has a part (no idea what it is though lol) fitted to the rear bottom of the pylons.

With the missiles and pylons built, Eduard supply a nice set of stencils to adorn the set. The decals are slightly glossy, and having used Eduard decals before there shouldn't be any problems.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE
SUMMARY
Highs: Well detailed and easy to build.
Lows: Slight mistake in the instructions.
Verdict: A good set of air to air missiles to hang from your French Mirage's.
Percentage Rating
85%
  Scale: 1:48
  Mfg. ID:  648 324
  Suggested Retail: 9,95
  Related Link: Matra R-530
  PUBLISHED: Aug 17, 2017
  NATIONALITY: France
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 84.73%
  MAKER/PUBLISHER: 88.31%

Our Thanks to Eduard Model Accessories!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Andy Brazier (betheyn)
FROM: ENGLAND - SOUTH EAST, UNITED KINGDOM

I started modelling in the 70's with my Dad building Airfix aircraft kits. The memory of my Dad and I building and painting a Avro Lancaster on the kitchen table will always be with me. I then found a friend who enjoyed building models, and between us I think we built the entire range of 1/72 Airfi...

Copyright 2017 text by Andy Brazier [ BETHEYN ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Tip: Just hit enter to submit your reply!
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move