login   |    register
Eduard [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
148
US 108gal paper fuel tanks
Brassin US 108gal paper fuel tanks
  • move

by: Andy Brazier [ BETHEYN ]

History
Faced with wartime metal shortages, and a need to extend the range of fighter craft heading to Europe, the British came up with an ingenious design for auxiliary drop tanks, making them out of resorcinol glue-impregnated kraft paper, which while having excellent tolerance characteristics for extreme heat and cold necessary for operation on an aircraft as well as being waterproof, the glue would slowly dissolve from the solvent effects of the fuel contained within the tank, developing leaks within a few hours of being loaded with fuel, making them a strictly a one-time use item, filled right before takeoff.
The tanks were not considered robust enough to land a plane with them attached, so if a mission was scrubbed, pilots were required to drop their sometimes still-full tanks at a specified drop point, usually the airfield’s dump where the tanks would be jettisoned.
Info from www.warbirdsnews.com

In the box
Packed in Eduard's standard blister pack, the 8 resin parts and one Photo etch sheet are well protected by foam and a cardboard backing sheet. A small instruction sheet and a small decal sheet make up the contents of the pack.
The resin parts are cast in a light grey resin and are attached to a casting block by the mating surfaces. The body of the tanks are moulded to the casting block along the length of the body, and looks easy to remove with a bit of sanding needed to smooth the attach point out.
Detail is very nice with raised detail for the "ribbed" effect along the nose, and a recessed fuel cap for the nose and tail parts.
Each tank is made up of three resin parts each, with a tail and a nose section to attach to the body. Two different nose parts are supplied, one early and one late, the difference being the late has two recessed areas on the nose, which holds two P.E parts.
What has impressed me with this "kit" is that Eduard have included the plumbing for the tanks, which runs along the top of the tank, then into the carrying aircraft.
For each tank there is around 12 P.E parts, which includes two filler caps, two metal straps, and all the plumbing. A couple of parts will need bending such as the straps, and a couple of the plumbing lines, but nothing to difficult.
There does seem to be a few spares on the fret, so the Carpet Monster can be fed.

Decals and Instructions
The small decal sheet has the stencils for the tanks, and as usual from Eduard, do look pretty good, with minimal carrier film.
The instruction sheet contains a two part build sequence, and a paint and decal placement guide. Colours for painting are the usual Mr Color and Gunze paint lines.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
SUMMARY
Highs: A very good and detailed set.
Lows: None really
Verdict: Most kits come with some external ordnance, but as far as I know none have the plumbing for the tanks, and this is where this Eduard set sets it apart. Beautifully detailed set of paper tanks to hang under any W.W.2 aircraft.
Percentage Rating
90%
  Scale: 1:48
  Mfg. ID: 648 233
  Suggested Retail: 9,95 €
  Related Link: US 108gal paper fuel tanks
  PUBLISHED: Feb 16, 2016
  NATIONALITY: United Kingdom
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 84.81%
  MAKER/PUBLISHER: 88.44%

Our Thanks to Eduard!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Andy Brazier (betheyn)
FROM: ENGLAND - SOUTH EAST, UNITED KINGDOM

I started modelling in the 70's with my Dad building Airfix aircraft kits. The memory of my Dad and I building and painting a Avro Lancaster on the kitchen table will always be with me. I then found a friend who enjoyed building models, and between us I think we built the entire range of 1/72 Airfi...

Copyright ©2019 text by Andy Brazier [ BETHEYN ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



Comments

Thanks for the review. I think I saw a picture on the forum of a P47 carying both the paper fuel tank as the standard one. That would be a nice idea for my P-47.
FEB 16, 2016 - 06:29 PM
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move