Brengun has released a 1/48 scale resin Rutan Quicke

Hasegawa has re-released the 1/200 scale Boeing 767. This re-release contains two variants that are operated by the JASDF: the E 767 AWACS and the KC-767J

Special Hobby has provided more details of the four marking options for the forthcoming release of the Piaggio P.108B ‘Quadrimotore’

Brengun has released a couple of 1/48 scale resin detail sets for the C-130 Hercules including a refueling pod and sponsons

Kovozávody Prostĕjov [KP] is to release in 1/72 scale the Spitfire Mk.IX ‘Spitfire Stars’ featuring three Spits flying for the USAAF, Yugoslavian and Soviet Air Forces

Brengun has released a 1/72 scale resin and photo etched kit of the Vought-Sikorsky VD-300 amphibous helicopter

Hasegawa has re-released the 1/48 scale F/A-18D Hornet ‘Night Attack’

Kovozávody Prostĕjov [KP] is to release the Sopwith Scooter and Swallow as two 1/72 scale kits

AZ Models will be re-releasing this month the 1/72 scale Bf 109G-14AS ‘Reich Defence’ with three marking options

Zvezda is drawing up plans to produce a quarter scale Mi-24V/VP Hind with a release scheduled for this Spring

Brengun will be releasing this month the 1/72 scale Yak-1 with a selection of four decal options depicting Soviet Aces

Wingsy Kits is progressing with their design work for a new tool quarter scale BF 109E

Coming soon from Dutch Profile is a reprint of the monograph of the P-40E/N in the service of ML-KNIL from 1942 to 1945

ICM Holding is to release the new tool 1/72 scale Polikarpov U-2/Po-2VS this month

SBS has produced a few more resin and metal kits of the 1/72 De Havilland DH-88 Comet 'Australia'

AZ Models is to release the Curtiss Mohawk Mk.IV ‘Over CBI’ in 1/72 scale

CMK has released a resin kit of the 1/32 scale MD-3 ground power unit

Hell Raising Harriers Part II is to be released by Flying Leathernecks in 1/48 scale, including AV-8B II Plus 165357 flown by then Maj Grunke

Hasegawa has re-released the 1/48 scale F-8E Crusader with two marking options for the French Navy

8A Decals has released a new 1/144 and 1/200 scale decal sheets for the Airbus A320 Neo and A321 Neo

Wolfpack Design is already making plans to create a quarter scale C2 ejector seat for the F-104, now they are planning to create the Martin Baker GQ-7(A) ejection seat which was also designed specifically for the Starfighter

Crécy Publishing is to publish a new monograph on the Do17 in their Classic Series written by Chris Goss

8A Decals has released a new 1/144 scale decal sheet for the MD-81 of Japanese airline company JAS

ICM’s quarter scale He 111 Zwilling is not out yet, but AIMS is already planning various marking options for the impending large kit

OZMods has re-stocked on the three 1/72 scale releases of the Pilatus PC-9

Coming soon from AIMS is this 1/72 scale decal sheet 'Early Wing Ju 88s' utilising Revells Ju-88A-1

Crecy Publishing is to republish ‘The Tiger Moth Story’ by Alan Bramson this time in paperback form

Mark Peacock has sent some sample pages to whet our appetite for the next volume in the Airframe Detail series from Valiant Wings.

Vector Resin has released a set of more refined looking resin propeller blades and boss for ICM’s 1/48 scale A-26B/C Invader

Black Dog has released a number of sets featuring Luftwaffe WWII armorers, loaders and bombs in 1/32 scale

Black Dog models has released a resin Lafayette pilot and aircraft mechanic with lion cub in 1/32 scale

Vector Resin has released a detail set for Eduards 1/48 scale P-51D Mustang including radiator and inlet wall detail as well as a tail wheel oleo with covering

CMK has released a seated pilot figure dressed for the ETO that has been designed for Eduards 1/48 scale P-51D Mustang

Welsh Models has released a Romboc BAC-1-11-561RC in 1/144 with the livery of Ryanair

AIMS has released a resin 1/32 scale figure of Marmaduke Thomas St John Pattle perhaps better known as Pat Pattel the South African WWII Ace that flew for the RAF.

Lukgraph Resin is planning to release a resin 1/32 scale De Havilland DH.89 Dragon Rapide

Vector Resin has released a superb looking resin engine for ICM’s 1/48 scale A-26B/C Invader

Apparently, Trumpeters 1/144 scale Xian Y-20 heavy transport is coming soon

Vector Resin is to release a Yak-7 resin conversion set for Modelsvit 1/48 scale kit of the Yak-9

Foxbot Decals has released a 1/72 scale set of paint masks so you can replicate the digital camouflage on Ukrainian Air Force An-26B ‘Blue 08’

DN Models have released a numbers and insignia paint mask set, too replace the decals found in Tamiya's 1/48th Spitfire Mk.I.

Black Dog Models has released in 1/32 a RFC Pilot and a camera operator carrying his camera, available individually as a duo pack

Black Dog Models has completed two resin detail sets plus a combined set for Academy’s 1/72 scale AH-64 D

Wolfpack Design has released its new tool 148 scale AT-38B Talon Lead-In-Fighter Trainer [LIFT] Trainer

Lisa from Airbrushes.com has informed Aeroscale of the release by Iwata of the Revolution CR3 Gravity-Feed Dual-Action Airbrush

Metallic Detail has released a 1/48 scale U.S. Navy torpedo loading cart. It can be purchased with or without the lightweight torpedo which was designed for helicopters

Metallic Details has released in 1/48 scale resin Mk.46 and Mk.54 Torpedoes and there are lightweight versions of the two for use with helicopters

Zvezda has released images of the renders for their future release of the Beriev Be-200 amphibious aircraft in 1/144 scale

Special Hobby has revealed the marking schemes for their forthcoming release of the 1/72 scale Piaggio P.108B ‘Quadrimotore’

Eduard has released a couple of missile sets in 1/32 scale including the AIM-9M/L Sidewinder and AIM-7M Sparrow